[xep-support] rx:flow-section keep-with-next

[Henk Rutten]

Hello Michael,

My problem and what I'm trying to achieve is:

Each flow:section can start anywhere on a page, with a horizontal rule above
the title. 
The header of each page also contains a horizontal rule.
I'm trying to prevent that a page starts with 2 horizontal rules.
If the last fo:block could be kept with the following rx:flow-section, this
problem would be solved....

Perhaps, there is another way to disable the placement of a horizontal rule
at the top of a page or column?

Kind regards,

Henk Rutten 

ICT Specialist 
GrafiData Deventer 

Keulenstraat 16, 7418 ET Deventer 
Postbus 2014, 7420 AA Deventer 
T. 0570-609797 
www.grafidata.nl 

De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is
uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht
ontvangt, wordt u verzocht de inhoud niet te printen, te kopiëren, te
verspreiden of op welke andere manier dan ook te gebruiken en de afzender
direct te informeren door het bericht te retourneren.

The information in this message may be confidential and is intended to be
exclusively for the addressee. Should you receive this message
unintentionally, please do not print, copy, distribute or in any other way
use the content and notify the sender by return e-mail.


-----Oorspronkelijk bericht-----
Van: owner-xep-support at renderx.com [mailto:owner-xep-support at renderx.com]
Namens Michael Sulyaev
Verzonden: donderdag 26 juli 2007 18:26
Aan: xep-support at renderx.com
Onderwerp: Re: [xep-support] rx:flow-section keep-with-next

Henk Rutten wrote:
> I'm using rx:flow-sections  to combine 1 and 2 column output.
> Is there a way to keep <fo:block> and the following <rx:flow-section> 
> together?

Hello Henk,

I believe keeps should not work across flow-section boundaries. By default
XEP will try to keep the flow-section close to the previous content, unless
an explicit page break is specified.

I can imagine an example when you may need it, but, for any particular
document, it's easy to add a page break before a problematic single-column
title to force it go the next page where the following content is.

--
Best regards,
Michael Sulyaev
http://www.renderx.net
http://www.renderx.com
mailto:support at renderx.com
-------------------
(*) To unsubscribe, send a message with words 'unsubscribe xep-support'
in the body of the message to majordomo at renderx.com from the address you are
subscribed from.
(*) By using the Service, you expressly agree to these Terms of Service
http://www.renderx.com/terms-of-service.html


-------------------
(*) To unsubscribe, send a message with words 'unsubscribe xep-support'
in the body of the message to majordomo at renderx.com from the address
you are subscribed from.
(*) By using the Service, you expressly agree to these Terms of Service http://www.renderx.com/terms-of-service.html