[xep-support] PDF V1.5

Geurt Lagemaat Lagemaat at Oriana-Automatisering.com
Wed Aug 18 01:55:39 PDT 2004


Hi,

Seems to me that XEP 3.8 doesn't support PDF v1.5 as created with
Acrobat 6. Is this correct and if so when is PDF v1.5 support planned?

Regards,


Geurt Lagemaat
Oriana Automatisering


DISCLAIMER:
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te
informeren. Wij adviseren u om bij twijfel over de juistheid of de
volledigheid van de e-mail contact met de afzender op te nemen.


> -----Oorspronkelijk bericht-----
> Van: owner-xep-support at renderx.com
[mailto:owner-xep-support at renderx.com]
> Namens Parr, Christopher
> Verzonden: woensdag 18 augustus 2004 9:23
> Aan: 'xep-support at renderx.com'
> Onderwerp: RE: [xep-support]
> 
> Hi Ken,
> 
> Thanks for the pointer. The latter is what I want to do, and I did
stumble
> across your web site before I went home last night. I printed it out
and
> intended to read it when I got home, but my little 22 month old
daughter
> decided I wasn't allowed to :)
> 
> I'll study it this morning.
> 
> Thanks again.
> 
> Chris
> 
> -----Original Message-----
> From: owner-xep-support at renderx.com
[mailto:owner-xep-support at renderx.com]
> On Behalf Of G. Ken Holman
> Sent: 18 August 2004 03:39
> To: xep-support at renderx.com
> Subject: Re: [xep-support]
> 
> 
> At 2004-08-17 15:07 +0100, Parr, Christopher wrote:
> >I've hit a problem with landscaped tables where the first page of the
> >table is displayed and the rest is missing.
> >
> >I'm using <fo:block-container reference-orientation="90"> to
orientate
> >the
> >table landscape however from what I can see from other posts this may
be
> >the wrong way to do it. I either can't see the solution in the posts
or I
> >don't fully understand the problem.
> 
> When I want to do landscaped tables with page flow I use a page
geometry
> where the body region is rotated.  Header and footer regions need not
be
> rotated.
> 
> If you have control over the page geometry that you can start your own
> page-sequence using the rotated page then it is straightforward.
> 
> If you want to have your authors *trigger* a rotated table, this is
not
> nearly as easy.  To mitigate the situation I created a free formatting
> semantic implemented in XSLT available from the "Free resources" area
of
> our web site.  It is called the Page Sequence Master Interleave (PSMI)
and
> rotated tables over page boundaries happens the be the exemplar used
in
> the
> documentation.
> 
> A Google search on "PSMI XSL-FO" points to a number of posts that I
and
> others have made on this.
> 
> I hope this helps.
> 
> ........................ Ken
> 
> --
> World-wide on-site corporate, govt. & user group XML/XSL training.
> G. Ken Holman                 mailto:gkholman at CraneSoftwrights.com
> Crane Softwrights Ltd.          http://www.CraneSoftwrights.com/f/
> Box 266, Kars, Ontario CANADA K0A-2E0    +1(613)489-0999 (F:-0995)
> Male Breast Cancer Awareness  http://www.CraneSoftwrights.com/f/bc
> Legal business disclaimers:  http://www.CraneSoftwrights.com/legal
> 
> -------------------
> (*) To unsubscribe, send a message with words 'unsubscribe
xep-support' in
> the body of the message to majordomo at renderx.com from the address you
are
> subscribed from.
> (*) By using the Service, you expressly agree to these Terms of
Service
> http://www.renderx.com/tos.html
> -------------------
> (*) To unsubscribe, send a message with words 'unsubscribe
xep-support'
> in the body of the message to majordomo at renderx.com from the address
> you are subscribed from.
> (*) By using the Service, you expressly agree to these Terms of
Service
> http://www.renderx.com/tos.html

-------------------
(*) To unsubscribe, send a message with words 'unsubscribe xep-support'
in the body of the message to majordomo at renderx.com from the address
you are subscribed from.
(*) By using the Service, you expressly agree to these Terms of Service http://www.renderx.com/tos.html



More information about the Xep-support mailing list