[xep-support] Font management in 3.17?

[Helberg, Clay]

Thanks, Richard. This is the solution Nikolai recommended as well, and it works fine for me.

> -----Original Message-----
> From: Richard Vincent [mailto:Richard.Vincent at excosoft.se]
> Sent: Wednesday, January 22, 2003 6:18 AM
> To: xep-support at renderx.com
> Subject: RE: [xep-support] Font management in 3.17?
> 
> 
> Hi!
> 
> I received a similar error message from Acrobat when using a 
> fontname that included spaces. When I deleted the spaces in 
> fonts.xml the problem went away.
> 
> Richard
> 
> -----Original Message-----
> From: owner-xep-support at www.renderx.com
> [mailto:owner-xep-support at www.renderx.com]On Behalf Of Helberg, Clay
> Sent: den 21 januari 2003 21:10
> To: xep-support at renderx.com
> Subject: RE: [xep-support] Font management in 3.17?
> 
> 
> Gustaf--
> 
> Yes, I transferred my afm directory as well. The error 
> message I get in the XEP log is this: 
> 
> {?file:/d:/XEP-3.17/etc/fonts.xml: FontName 'Geometric Plain' 
> specified in AFM d
> oes not match font name 'geometric'}
> 
> This appeared for several other custom fonts as well (all of 
> which worked fine with 3.04). Tweaking the font names to 
> match those that XEP seemed to want eliminates the error 
> message, but this particular font still gives me problems 
> even when I fix the name from "Geometric" to "Geometric 
> Plain" (and add "Geometric" as an alias).
> 
> When I view the generated PDF, every time I try to view a 
> page containing a character from this font, Acrobat Reader 
> (5.05) gives me this error:
> 
> There was an error processing a page. There was a problem 
> reading this document(110).
> 
> 								
> 		--Clay
> 
> > -----Original Message-----
> > From: Gustaf Liljegren [mailto:gustaf.liljegren at xml.se]
> > Sent: Tuesday, January 21, 2003 11:11 AM
> > To: xep-support at renderx.com
> > Subject: Re: [xep-support] Font management in 3.17?
> > 
> > 
> > Clay wrote:
> > 
> > >I've been using 3.04 for some time, and I decided to try 
> > updating to the
> > current version, 3.17. When I did, I found that my fonts.xml 
> > file (which I
> > transferred over from my previous installation) no longer 
> > works, and I'm
> > getting invalid PDF files. Can someone tell me what I need to 
> > change to get
> > custom fonts working again? Thanks.
> > 
> > Did you transfer your /afm directory too? What is the error message?
> > 
> > I suggested earlier that RenderX make the .jar file avalible 
> > separately,
> > unless something else important has changed too. Then you'd 
> > only have to
> > switch one file.
> > 
> > Gustaf
> > 
> > 
> > -------------------
> > (*) To unsubscribe, send a message with words 'unsubscribe 
> > xep-support'
> > in the body of the message to majordomo at renderx.com from the address
> > you are subscribed from.
> > (*) By using the Service, you expressly agree to these Terms 
> > of Service http://www.renderx.com/tos.html
> > 
> > 
> -------------------
> (*) To unsubscribe, send a message with words 'unsubscribe 
> xep-support'
> in the body of the message to majordomo at renderx.com from the address
> you are subscribed from.
> (*) By using the Service, you expressly agree to these Terms 
> of Service http://www.renderx.com/tos.html
> -------------------
> (*) To unsubscribe, send a message with words 'unsubscribe 
> xep-support'
> in the body of the message to majordomo at renderx.com from the address
> you are subscribed from.
> (*) By using the Service, you expressly agree to these Terms 
> of Service http://www.renderx.com/tos.html
> 
> 
-------------------
(*) To unsubscribe, send a message with words 'unsubscribe xep-support'
in the body of the message to majordomo at renderx.com from the address
you are subscribed from.
(*) By using the Service, you expressly agree to these Terms of Service http://www.renderx.com/tos.html